AZ31B magnesium plate and sheet represent the industrial gold standard for lightweight structural tooling, precision CNC fixture plates, aerospace brackets, and high-speed photoengraving embossing dies. Offering an unmatched density of 1.78 g/cm³—36% lighter than aluminum alloy 6061 and 78% lighter than steel—AZ31B hot rolled and warm finished sheets combine superior stiffness-to-weight ratios with exceptional vibration damping and ultra-fast high-speed machinability.
For international procurement directors, precision machine shops, and tooling engineers, sourcing premium magnesium plates requires strict adherence to international standards, primarily ASTM B90 / ASTM B90M, verified dimensional thickness/flatness tolerances, appropriate temper selection (H24 vs. O temper), and export-grade moisture barrier packaging. This technical sourcing guide delivers actionable engineering data, manufacturing specifications, and procurement protocols from China’s leading magnesium alloy mill.

1. ASTM B90 / B90M Specification & Chemical Composition
Commercial and aerospace grade AZ31B magnesium alloy plates produced at Miji Magnesium conform strictly to ASTM B90/B90M (Standard Specification for Magnesium-Alloy Sheet and Plate) and AMS 4377 specifications. Direct-reading optical emission spectrometry (OES) inspects every casting melt to eliminate tramp impurities (Fe, Ni, Cu) that accelerate galvanic corrosion.
| Element | ASTM B90 Min (wt%) | ASTM B90 Max (wt%) | Miji Mill Target (wt%) | Function & Metallurgical Impact |
|---|---|---|---|---|
| Aluminum (Al) | 2.50% | 3.50% | 2.95% – 3.10% | Primary solid solution strengthening; grain refinement |
| Zinc (Zn) | 0.60% | 1.40% | 0.90% – 1.10% | Improves room temperature tensile strength & fluid castability |
| Manganese (Mn) | 0.20% | 1.00% | 0.30% – 0.45% | Forms Al-Mn intermetallics, scavenging iron to resist corrosion |
| Silicon (Si) | — | 0.10% | < 0.02% | Impurity controlled below threshold to prevent brittle Mg2Si |
| Copper (Cu) | — | 0.05% | < 0.005% | Strictly restricted to prevent severe micro-galvanic cells |
| Nickel (Ni) | — | 0.005% | < 0.001% | Critical threshold element for marine atmospheric resistance |
| Iron (Fe) | — | 0.005% | < 0.002% | Maintained at high-purity limits for maximum salt-spray durability |
| Magnesium (Mg) | Balance (96.0% – 97.0% High-Purity Matrix) | |||
2. Temper Selection: AZ31B-H24 vs. AZ31B-O
Choosing the correct heat treatment and strain-hardened temper is critical for achieving optimal mechanical yield or secondary sheet metal forming:
- AZ31B-H24 (Strain Hardened and Partially Annealed): The standard commercial condition for tooling plates, CNC machining blocks, and photoengraving sheets. Provides optimal tensile yield strength (150–200 MPa) and superior surface hardness (65–75 HBW), preventing deflection during milling and clamping.
- AZ31B-O (Fully Annealed): Heating between 345°C and 380°C removes work hardening, maximizing ductility (Elongation > 15%). Recommended for warm deep drawing, stamping, and complex roll forming at elevated temperatures (200°C–260°C).
- AZ31B-F (As-Fabricated): Directly from the multi-pass hot rolling mill without subsequent thermal processing, suited for heavy slab roughing and custom downstream re-rolling.
| Mechanical Property | AZ31B-H24 (Plate / Sheet) | AZ31B-O (Annealed Sheet) | 6061-T6 Aluminum (Comparison) |
|---|---|---|---|
| Density (g/cm³) | 1.78 g/cm³ | 1.78 g/cm³ | 2.70 g/cm³ (+51.7% heavier) |
| Tensile Strength (UTS) | 260 – 290 MPa | 240 – 260 MPa | 310 MPa |
| Tensile Yield Strength (YS) | 180 – 220 MPa | 140 – 160 MPa | 276 MPa |
| Elongation at Break (A50) | 8% – 15% | 15% – 22% | 12% – 17% |
| Brinell Hardness (HBW) | 65 – 75 | 55 – 63 | 95 |
| Modulus of Elasticity (E) | 45 GPa | 45 GPa | 68.9 GPa |
| Specific Damping Capacity | High (10× vs Aluminum) | High (10× vs Aluminum) | Low (Vibration prone) |

3. Dimensional Availability & Ultra-Flat Tooling Plate Tolerances
Precision automation fixtures, semiconductor vacuum chucks, and aerospace assembly jigs require strict thickness uniformity and minimal residual stress. Miji Magnesium operates advanced 12-roll precision tension levelers and dual-side face milling equipment to deliver ultra-flat magnesium tooling plates:
| Thickness Category | Standard Thickness (mm / in) | Standard Width & Length | Thickness Tolerance | Surface Flatness Guarantee |
|---|---|---|---|---|
| Precision Foil & Thin Sheet | 0.5mm – 2.0mm (0.020″ – 0.080″) | 1000 × 2000 mm / Custom Coils | ± 0.03 mm | Stretch leveled, tension controlled |
| Medium Gauge Plate | 2.5mm – 12.0mm (0.100″ – 0.472″) | 1000 × 2000 mm / 1250 × 2500 mm | ± 0.08 mm | ≤ 0.20 mm / meter |
| Heavy Tooling Plate | 12.5mm – 65.0mm (0.500″ – 2.559″) | 1250 × 2500 mm / 1500 × 3000 mm | ± 0.12 mm | ≤ 0.12 mm / meter (Ultra-Flat) |
| Extra Heavy Slab / Block | 70.0mm – 150.0mm (2.75″ – 6.00″) | Custom Saw Cut Blocks | ± 0.50 mm | Pre-squared, face milled on request |

4. Core Industrial Applications of AZ31B Plates & Sheets
- Photoengraving & Hot Stamping Dies: AZ31B etching sheets are widely recognized in the global graphics and packaging industry for embossing, foil stamping, and debossing. Nitric acid etching achieves crisp 0.05 mm shoulder edges with zero undercut, transferring thermal energy 3× faster than steel while being 80% lighter than brass dies.
- Automotive & Commercial Vehicle Lightweighting: Used for battery pack upper housings, seat frames, dashboard carrier plates, and racecar undertrays, contributing to essential weight reduction for EV range extension.
- Semiconductor & Inspection Fixtures: With superior internal damping capacity (absorbing vibrations within milliseconds), AZ31B tooling plates provide rock-solid stability for high-speed CMM inspection tables and pick-and-place robot end-effectors.
- Aerospace Interior & Electronic Enclosures: Combining natural electromagnetic shielding (EMI/RFI attenuation > 60 dB across 10 MHz–1 GHz) with flame-resistant alloy chemistry conforming to FAA flammability benchmarks.
5. Quality Verification, MTC Certification & Export Packaging
Overcoming the challenges of trans-oceanic transit requires uncompromising quality control and packaging standards. Every shipment from Miji Magnesium is supported by complete documentation and barrier protection:
- EN 10204 Type 3.1 Inspection Certificate (MTC): Full traceability including melt heat numbers, OES spectroscopic chemical assays, tensile test results (UTS, Yield, Elongation), and ultrasonic testing (UT Level 1/2) reports.
- Surface Protective PE Film: Both faces of polished tooling plates are laminated with blue low-tack protective film to prevent scratching during handling and CNC setup.
- Hermetic Vacuum Aluminum Foil Bag: Sealed moisture-barrier packaging with active desiccant pouches to guarantee 100% zero-oxidation delivery across 60+ days of sea freight.
- Solid Fumigated Wooden Crates: Reinforced export-compliant plywood and solid wood crates with internal shock-absorbing EVA foam blocks to prevent corner impact damage.
6. Sourcing AZ31B Magnesium Plates: RFQ & Engineering Support
Whether you require standard 1000×2000 mm inventory sheets, custom waterjet-cut blanks, or precision face-milled tooling plates with tight tolerances, Miji Magnesium provides end-to-end manufacturing and worldwide logistical support.
Submit your dimensional drawings (CAD, STEP, PDF) or thickness requirements to our engineering sales desk at sales@mijimg.com. We provide DFM evaluations, standard compliance checks, and formal commercial quotations within 24 hours under complete NDA protection.